Common Causes Why Your Electric Stove Isn’t Heating Up

Compared to a gas stove, an electric stove provides a few benefits. One benefit is that it efficiently and uniformly distributes heat. It may be disappointing to find the cooktop not heating up after spending a lot of time preparing supper. Here, you have a few options.

You can either hire professional appliance repair services to fix your device or continue to troubleshoot. Eventually, you may identify the reason and resolve the issue independently.

In this article, we will run you through some possible causes and fixes to your stove's heating problem!

Understanding How Your Electric Stove Works

Burners and heaters both use electrical resistance to create heat. Hence the two devices are conceptually comparable. However, to cook food, your electric cooktop needs to produce much greater heat, which uses more electricity.

Electric burners are connected to a 240-volt circuit because of the enormous power required. A regular 120-volt appliance can't increase the temperature enough to provide adequate heat for cooking at 120 volts, the standard supply voltage in Canada. This is why electric stovetops are often dual voltage.

Your appliance should indicate AC 120/240 V 50-60 Hz as an input.

Potential Problems

A few factors might cause an electric stove to start but take a long time to heat up. The first step is to turn off the power by disconnecting the appliance before attempting to diagnose and resolve the issue.

Additionally, give it some time to cool if you just used the cooktop. In any case, one of the following is most likely the cause of the heating problem:

1 - Problems with Your Power Source Receptacle

In the power outlet, moisture, grease, and oil can collect and lead to issues. It could eventually cause arcing. Even though the electrical short only occurs sometimes and seems unharmful, the heating element ultimately sustains damage. Regularly cleaning the element tips within the trash can will stop this from happening.

2 - A Worn-Down Heating Element

The heating element is the area that heats up when you turn on your stove. It is best to regularly clean the heating element to prevent damage.

Blistering, fractures, or bubbling should be simple to identify on typical stove burners. If you have radiant burners, you need to check the coils for burn spots and other damage by lifting the ceramic top to see underneath.

3 - Faulty Wires

Don't forget to check every electrical cable. In particular, keep an eye out for frayed wires and other damage indicators, such as burn marks. As long as you are sure there is no harm, loose wires can be replaced safely.

4 - Problems with the Switch

Each heating element has a specific switch that may be used to control the voltage and, consequently, the heat. It turns off the energy once it reaches the appropriate temperature. This cycle continues throughout the whole cooking procedure.

Problems with this switch may cause uneven heating.

Conclusion

As it is a necessity in the home, it can get frustrating if your electric stove starts having problems with heating up. It is best to seek the help of a stove repair professional to get it fixed, especially if you aren't sure what's causing the problem.

Are you in need of stove repair in Richmond Hill? Pro Appliance is a reliable home appliance service and repair company offering you affordable rates. Give us a call today to learn more!